Skip to content

Blog · 2026-11-06

What is a good CTR for display ads? Benchmarks with sources

Most published display ad CTR averages sit near 0.46% to 0.57%. See each benchmark's source, year and sample, why CTR misleads, and what to track instead.

Marketer at a desk reviewing campaign results on a laptop next to a notebook and coffee

A good CTR for display ads is one that matches or beats the benchmark for your industry and ad format. Most published display averages fall between 0.46% and 0.57%, and individual industries range from 0.22% to 1.08%. Clicks are only one signal. Judge a display campaign mainly on conversions, reach and how many people actually saw the ad.

What counts as a good CTR for display ads?

Your display CTR is good if it is at or above the average for your industry and format. Your own past campaigns are an even better baseline.

CTR (click-through rate) is clicks divided by impressions. An impression is one time your ad was shown. As SEO Locale's guide to CTR basics puts it, an ad shown 100 times with one click has a 1% CTR.

Industry averages give you a starting point, but they mix together many formats, audiences and placements. Once you have run a few campaigns, compare each new one with your own history for the same audience and creative size. That comparison tells you more than any outside number.

What are the published display CTR benchmarks?

The well-known benchmarks sit close together, from about 0.46% to 0.57%. A few outliers are much lower because they measure standard banners only, or a single platform. Before you compare yourself to any figure, check where it came from.

SourceYear or periodSample and scopeDisplay CTR
WordStreamAug 2017 to Jan 201814,197 US accounts on Google Search and Display, over $200 million in spend0.46% (median)
Focus DigitalFeb to Dec 2025Display campaigns across major industries0.46% overall; 0.22% to 1.08% by industry
CXLNo date statedAverage across industries0.57%
BannerflowPage updated 2025, 2022 platform dataBannerflow's own display platformAbout 0.1%
BroadstreetPage from 2022 to 2023Publisher-side ad server0.03% to 0.05% static banners; 0.5% to 1% larger custom formats

The 0.46% figure that most articles repeat is old. WordStream's Google Ads industry benchmarks report it from client accounts that advertised between August 2017 and January 2018. WordStream also says its "averages" are medians, which reduces the pull of outliers.

A newer study lands in the same place. Focus Digital's 2025 display CTR analysis found an overall industry average of 0.46% and called it relatively stable against 2024. That is the most recent dated figure in the table.

How does display CTR vary by industry?

Industry changes display CTR more than almost anything else. Real estate runs at more than double the B2B rate in the same data. Usermaven's 2026 Google Ads benchmarks by industry lists these display averages:

IndustryAverage display CTRSource
Real estate1.08%Usermaven, 2026
Auto0.60%Usermaven, 2026
E-commerce0.59%Usermaven, 2026
Health and medical0.59%Usermaven, 2026
Legal0.59%Usermaven, 2026
B2B0.46%Usermaven, 2026
Technology0.39%Usermaven, 2026
B2B services0.22%Focus Digital, 2025

Focus Digital's 2025 data puts B2B services at the bottom and real estate at the top, also at 1.08%. Focus Digital links that real estate rate to buyers who are actively researching a purchase, and the B2B low to longer business decisions.

This is why one overall average can mislead you. A 0.9% CTR would be roughly double the B2B average and about normal for a real estate ad. Pick the row that matches your business before you decide whether a campaign is doing well.

Why is display CTR so much lower than search CTR?

Search ads reach people while they are looking for something. Display ads reach people while they are reading or browsing something else. In WordStream's 2017 to 2018 dataset, search averaged 3.17% and display 0.46%. CXL reports a similar gap: 6.64% for search against 0.57% for display. CXL explains that searchers have typed what they want, while display viewers skim ads passively.

Terra's 2026 Google Ads benchmarks also expects a high-intent search ad to outperform a broad display ad on CTR. In practice, never score a display campaign against a search benchmark. A 0.5% display CTR is normal. The same rate on search would be a problem.

Why can CTR mislead you on display campaigns?

CTR counts clicks without checking whether they were worth anything. Accidental clicks, bots and low-quality placements can push the rate up while sales stay flat.

Device is one example. An analytics lead at a DSP reported that across 5 billion impressions, smartphone ads earned a 27% higher CTR than desktop and laptop ads. He suggested some of that gap comes from fat-finger clicks on small screens, not real interest. FullThrottle.ai lists bot traffic, accidental clicks, click farms and low-quality inventory as common causes of inflated CTR. It also notes that a high CTR next to a low conversion rate usually points to poor traffic quality.

CTR also misses people who see an ad, don't click, and buy later. The same DSP analyst said fewer than 2% of transactions come directly from a click. SEO Locale makes a similar point: a high click rate means little if the visitors don't buy.

You can reduce junk clicks by controlling where your ads run. Waveband DSP has ads.txt-only supply turned on by default, so it buys only from sellers that publishers have authorized. Domain and app block lists narrow where ads run as well. These settings make your clicks easier to trust, but they don't guarantee results. Our page on programmatic display buying controls covers the full set.

What should you measure instead of CTR?

Choose the metric that matches what the campaign is for. Then keep CTR as a secondary check.

  • Viewability. This tells you whether the ad could actually be seen. Digital Applied cites the MRC standard for desktop display: at least 50% of the ad's pixels on screen for at least 1 continuous second.
  • Interaction rate. This is interactions divided by impressions. Bannerflow recommends it for comparing which visual or message holds attention, especially for formats people can engage with without clicking.
  • Conversion rate and CPA. These show how many visitors took the action you wanted, and what each one cost.
  • View-through conversions. These count people who saw the ad, didn't click, and converted later. They capture the buyers that CTR misses.
  • Frequency. This is how many times the same person saw your ad. Too low and they won't remember it. Too high and you waste budget.

Waveband Signal tracks conversion events with click-through and view-through attribution, so you can see both kinds of buyer in one report. For reference points beyond click rates, see our programmatic advertising benchmarks.

How do you improve a low display CTR?

Fix who sees the ad before you fix what they see.

  1. Tighten targeting. Narrow the geography, devices and audiences, and add domain and app block lists to cut placements that bring clicks but no conversions.
  2. Test new creatives. Run two or three versions side by side and change one element at a time, such as the image, headline or offer. Our guide to making and testing new ad creatives covers the formats you can upload or generate.
  3. Try larger or richer formats. Broadstreet, a publisher ad server, reports 0.03% to 0.05% for static standard banners and 0.5% to 1% for its larger custom formats. That is a vendor's claim about its own products, so treat it as a direction, not a promise. For more on formats built to hold attention, read about attention display formats on a self-serve DSP.
  4. Personalize the ad. In Bannerflow's 2022 platform data, feed-based personalized ads earned about 2.30% higher CTR than non-feed ads.
  5. Check the clicks you already get. If CTR rises but conversions don't, look at device and placement reports before you change the creative.

See how it works in Waveband.

FAQ: display ad CTR

Is 0.46% still the current average display CTR?

The 0.46% figure comes from WordStream data collected between August 2017 and January 2018. Focus Digital's 2025 study found the same 0.46% overall average. That suggests the number still holds, though the two studies measured different samples.

Is a 1% display CTR good?

A 1% CTR is well above most published averages. It is close to the 1.08% real estate figure. Check conversions and device mix before you celebrate, because accidental mobile clicks can push CTR up without bringing in buyers.

Do CTV ads have a CTR?

Mostly no. TV ads on streaming apps usually play on a screen nobody can click. CTV is judged on reach, completed views and later conversions, which you can track with view-through attribution.

By Waveband Team